Rohde & Schwarz RTC1000
Digital oscilloskop Rohde & Schwarz RTC1000 har 50, 70, 100, 200 og 300 MHz båndbredde. Sample Rate op til 2 GSa/s. Kompakt 2 kanals digitalt Oscilloskop med stort 6,5″ farve VGA display.
Indbygget komponent tester og digital voltmeter og mulighed for 8-kanal logik probe (option).
Ydermere fås til RTC1000 en optionel “Waveform & Pattern Generator” (RTC-B6), som op til 50 Mbit/s genererer sinus, firkant, puls, rampe og støj kurver til f.eks. uddannelse. Kurveformer og pattern kan importeres via CSV filer eller kopieres direkte fra oscilloscope “waveforms”.
Der medfølger kurveformer eksempler, som f.eks. I2C, SPI, UART og CAN/LIN.
For mere information kontakt os på tlf. 75522020
Rohde & Schwarz RTC1002
* Skærm: 6,5” farve TFT VGA display (256 farver).
* Opløsning: 640×480
* Antal kanaler: 2 kanaler + 8 logik indgange (option)
* Følsomhed og nøjagtighed: kalibreret 1 mV/div til 10 V/div ±3% (13 steps, 1-2-5 sekvens).
* Båndbredde: 50 MHz (Standard)
* Båndbredde upgrade til : 70 MHz, 100 MHz, 200 MHz og 300 MHz
Vertical system
Input channels : 2 channels
Input impedance : 1 MΩ ± 2 % with 14 pF ± 2 pF (meas.)
Analog bandwidth (–3 dB) : > 50 MHz
with -B220 option : > 70 MHz
with -B221 option : > 100 MHz
with -B222 option : > 200 MHz (≥ 5 mV/div)
with -B223 option : > 300 MHz (≥ 5 mV/div)
Lower frequency limit (–3 dB) at AC coupling < 2 Hz (meas.)
Analog bandwidth limits (max. –1.8 dB, min. –3.5 dB) : 20 MHz (meas.)
Rise time (10 % to 90 %, calculated) R&S®RTC1002 < 7 ns
with -B220 option : < 5 ns
with -B221 option : < 3.5 ns
with -B222 option : < 1.75 ns
with -B223 option : < 1.15 ns
Vertical resolution : 8 bit, up to 16 bit with high-resolution, decimation mode
DC gain accuracy
– maximum operating temperature change of ±5 °C after self-alignment
– all input sensitivities ±3 % of full scale
DC measurement accuracy
– after adequate suppression of measurement noise by using highresolution sampling mode or waveform averaging
– ±(DC gain accuracy × |reading + sensitivity × position setting| + 0.1 div + 1 mV)
Input coupling : DC, AC, GND
Input sensitivity : 1 mV/div to 10 V/div
Maximum input voltage : max. 200 V (Vp), derates at 20 dB/decade to 5 V (RMS) above 100 kHz
Position range : ±15 div
Channel-to-channel isolation (each channel at same input sensitivity)
input frequency < analog bandwidth : >35 dB (meas.)
Horizontal system
Timebase range : selectable between 1 ns/div and 100 s/div
Channel deskew : ±120 ns
Trigger offset range:
– minimum – memory depth/actual sampling rate
– maximum : 2^33/actual sampling rate
Modes : normal, roll ≥ 50 ms/div
Timebase accuracy:
– after delivery/calibration at +23°C : ±50 ppm
– during calibration interval : ±60 ppm
Acquisition System
Maximum realtime sampling rate : 2 × 1 Gsample/s or 1 × 2 Gsample/s
Memory depth per channel : 2 × 1 Msample or 1 × 2 Msample
Acquisition modes:
– refresh : first sample in decimation interval
– peak detect : largest and smallest sample in decimation interval (1 ns detection)
– high resolution : average value of all samples in decimation interval (up to 16 bit)
– envelope : envelope of acquired waveforms
– average : average over a series of acquired waveforms
– filter : low-pass, adjustable smooth
Number of averaged waveforms : 2 to 1024
Waveform acquisition rate:
– dot display, single channel, max. waveform rate : up to 10 000 waveforms/s
* Dimensioner: 285 x 175 x 140 mm
* Vægt: 1,7 kg