Produkter

Fluke Laser shaft alignment
Fluke Laser shaft alignment setup
Fluke Laser kit shaft alignment
Fluke-830-BT-Sensor

Fluke 832

Kategori:

Fluke 832 klarer komplicerede opretningsberegninger, så du har de svar, du skal bruge til at justere maskinen.

Hurtigere opsætning, færre trin

  • 832 benytter et system med én laser og to detektorer, hvilket gør akselopretning af standardroterende maskiner hurtigere.
  • Spring for-opretningen over, og gå direkte til måling.
  • Monter én laser og én sensor for at påbegynde opretningen.

Pålidelig vejledning i realtid

  • Live-feedback hjælper dig med at justere maskinen sikkert under hver akselopretning.
  • Overvåg justeringer samtidigt i både det vertikale og horisontale plan.
  • Modtag automatiske meddelelser, hvis værdierne ligger uden for grænseværdierne.
  • Verificer resultaterne øjeblikkeligt ved hjælp af kvalitetsfaktor og standardafvigelse.

Alsidige målemuligheder

  • Uanset om rotationen er fuld eller begrænset, tilpasser Fluke 832 sig opgaven.
  • Anvend statisk maskine eller flere fodpositioner afhængigt af opsætningen.
  • Foretag pålidelige målinger, selv når akslerne ikke er koblet sammen.

Indbyggede arbejdsgange til vanskelige opretningsopgaver

  • Håndter almindelige udfordringer i felten uden at skulle skifte system.
  • Identificer og korriger “Soft Foot” (ustabilt fundament/skæve fødder), før opretningen påbegyndes.
  • Pålidelig drift, selv under komplekse fundamentforhold.

Smartere rapporter, tydeligere ROI

  • Registrer, dokumenter og del opretningsresultater.
  • Generer tydelige, skræddersyede opretningsrapporter.
  • Logger automatisk udstyrsspecifikke ID’er og målinger.
  • Udnyt den indbyggede ROI-beregner til at se de langsigtede besparelser.
  • Send resultater via e-mail ved hjælp af indbyggede skabeloner.

 

Fluke 832 General specifications
CPU Processor: Octa-Core (8): 2.2 GHz (2) and 1.8 GHz (6)
Memory: 4 GB LPDDR4X SDRAM/64 GB UFS Flash
Display Technology: Corning® Gorilla® Glass
Resolution: 600 nits, color WXGA 1280×800
Dimensions: 8 inch/20.3 cm
Power supply Operating time: Up to 11 Hours
Battery: 6100 mAh 3.87 V rechargeable Li-Ion Polymer; (23.61 Wh)
Charging: USB-C
Connectivity Wifi: IEEE 802.11 a/b/g/n/ac/d/h/i/r/k/v/w/mc/ax 2×2 MU-MIMO; Wi-Fi® certified; IPv4, IPv6 (Wi-Fi 6)
Bluetooth: Bluetooth v5.1 / 2.1+EDR Class 2 (Bluetooth LE)
RFID: Integrated RFID with read and write capabilities Docking connector (charge and data)
USB-C side port (tablet charging and data only)
Environmental protection IP 65: Dustproof and water jets resistant
Relative humidity: 5% to 95% non-condensing
Drop test 1.2 m (4 ft)
Temperature range Operation: -20°C to 50°C (-4°F to 122°F)
Storage: -40°C to 70°C (-40°F to 158°F)
Dimensions 267 mm L x 171 mm H x 35 mm D 10 33/64″ x 6 47/64″ x 1 3/8″
Weight 930 g/2.1 lbs
Camera Rear: Image capture: 13 MP auto-focus camera with user controllable LED flash
Front: 5MP
Carrying case Dimensions 595 x 355 x 115 mm (23 1/2″ x 14″ x 4 1/2″)
Fluke 832 Sensor general specifications
Type 6-axis 2 planes (4 displacement axes and 2 angles)
Measurement Optical range 14 x 14 mm (0.55 x 0.55 in.)
Area Unlimited, dynamically extendible
Resolution 1 μm (0.04 mil); Angular 10 μRad
Error < 2%
Transmitted rate Approx. 20 Hz
Inclinometer Resolution 0.1°
Error Roll +-1°; Pitch +- 3°
LED indicators 1 LED for laser adjustment, battery and charge status; 1 LED for BT communication
Power supply Battery Lithium-Ion rechargeable battery 3.7 V, 4.7 Wh
Operating time 30 hours (continuous use)
Charging time 2.5 h for up to 80%; 4 h for up to 100%
Charging USB-C
External interface Integrated low power 2.4 GHz Radio (BT LE); USB 2.0 Full Speed
Radio transmission distance Up to 50 m (160 ft) direct line of sight
Environmental protection IP 65 Dustproof and water jets resistant, shockproof
Relative humidity 10% to 90%
Ambient light protection Optical and active electronic digital compensation
Temperature range Operation -10°C to 50°C (14°F to 122°F)
Charging 0°C to 35°C (32°F to 95°F)
Storage -20°C to 50°C (-4°F to 122°F)
Dimensions Approx. 104 x 72 x 54 mm (4 1/8″ x 2 13/16″ x 2 1/8″)
Weight Approx. 231 g (8.2 oz)
Fluke 832 Laser general specifications
Type Semiconductor laser diode
Laser Power < 1 mW
Divergence 0.3 mrad
Wavelength 630-640 nm (red, visible)
Separation distance Up to 10 m
Adjustment No
Safety class Class 2 according to IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Safety precaution: Do not look into laser beam
Inclinometer Resolution 0.1°
Error Roll +-1°
LED indicators 1 LED for battery and charge status
Power supply Battery Lithium-Ion rechargeable battery 3.7 V, 4.7 Wh
Operating time 40 hours (continuous use)
Charging time 2.5 h for up to 80%; 4 h for up to 100%
Charging USB-C
Environmental protection IP 65 Dustproof and water jets resistant, shockproof
Relative humidity 10% to 90%
Temperature range Operation -10°C to 50°C (14°F to 122°F)
Charging 0°C to 35°C (32°F to 95°F)
Storage -20°C to 50°C (-4°F to 122°F)
Dimensions Approx. 101 x 75 x 37 mm (4” x 2 15/16” x 1 7/16”)
Weight Approx. 190 g (6.7 oz)

 

 

 

 

Relaterede varer

Produkter